This system deletes both upper and lower balljoints and gets rid of a telescoping upper balljoint. Both the upper and lower cups press in just like regular balljoints with one HUGE difference……it’s the last time you’ll ever have to press in any joint! The rebuild process consists of removing the C-clip and replacing the spherical bearings. Both assemblies feature a shim/O-ring which seal the bearing from debris from the top side. All spherical bearings feature PTFE liners, so no greasing is needed but dry lube can be used.
- Custom machined press-fit cups
- Custom hardened 3/4″ upper bolt/Lower stud with taper
- 3/4″ FK Spherical Bearings with C clip
- Grade 8 Locknuts
- Shims/O-ring Seals
- All Delete Systems products are backed by a 2 year/30,000 mile warranty which will replace any worn out spherical bearings or broken hardware for free. *Warranty registration requires you to email us at firstname.lastname@example.org after your package has shipped.
This Listing is a Balljoint Delete System for any Jeep Axle where you are upgrading your knuckles to the WJ Knuckle, which has better high steer options and allows you to run the larger WJ Brakes! If you are not familiar with the "WJ Knuckle Swap" and what it takes to do it, please contact us or do some research prior to ordering this kit.
This item qualifies for Free Shipping for products over $100!